You must be worried about How to Sharpen the Chainsaw Chain, Right?
If you want the best cutting service from your chainsaw, and extend the life of it as well, you’ll have to ensure its care for and maintain. Only the proper maintenance of any tools can provide you the best service from it and can extend the lifetime of using it as well.
If you want to extend the life of your chainsaw, take a quick look at bellow’s How to Sharpen the Chainsaw Chain. Yes, we are presenting here How to Sharpen the Chainsaw Chain for you, my friend. Stick till the end to read it!
Tips to Care for and Maintain a Chainsaw
1.How to Sharpen the Chainsaw Chain:
To get the best long-lasting service of it regularly, you should go through some key activities. You should sharp the chainsaw every time you fill with fuel in it. Find the sharpening angle specifications, put on your gloves and eyewear, wipe oil and grease off the chain, repair the chain if it is damaged, adjust depth gauges.
2.Keep It Clean
The first thing about the chainsaw maintenance checklist is keeping it clean. Trust me, it really works like magic. Do you know? A clean chainsaw will give you better performance. For cleaning your chainsaw, Place the saw on a flat surface and make sure to disconnect it from all power sources.
I’m quite sure you are thinking much about how to clean a chainsaw chain. So, get ready to completely remove the chain from the guide bar, if it is dirty enough. Then soak it for half an hour to in the mixture of water and ammonia. Scrub the chain after half an hour with a bristled brush. Continue your scrubbing until you get your expected sparkles of the chain. After that, you need to rinse it with water and dry it off with a clean towel.
Sometimes, you may need to clean each part of the chainsaw separately. Such as, checking the carburetor, if it is blocked up with debris! If it is, then it will definitely block the fuel system to the engine. And it causes to having trouble in starting the chainsaw. So, for chainsaw engine maintenance you need to clean this part of chainsaw by using fuel additive or compressed air.
Later on, remove the cover plate, needle valves, and diaphragm from the chainsaw. Soak them into the same mixture of water and ammonia. You will have to clean the filter (air) with soapy water. Check the filter properly, if you are unable to get that debris out of it, replace it then.
So, all these chainsaw maintenance and repair steps will provide you a working well and clean chainsaw.
3.Sharpen the Blades:
It is necessary to sharpen the chainsaw for working efficiently. You should sharp the chainsaw and clean the debris from it after every time you use it. Keep the chainsaw blade sharp, which will make your cutting more diligent. And increase the rate of safety for the person who is using the saw and repel the kick-backs as well.
So, place the chainsaw on a flat surface as before. Use a vise or tabletop clamp to hold it. Basically, it will help you to prevent slipping while sharpening it.
To tighten the chain, use a screwdriver by tightening the tension adjusting screw on your chainsaw. It will help you to prevent the moving chain as you are sharpening it. Start sharpening, and mark it with a marker pen so that you can easily track where you started from.
Then start taking a file that sharpens and pushes it horizontally across the blade of the chainsaw. Lift the file and repeat the same process until you meet the end of the blade.
You need to make sure to sharpen only in one direction for better performance. Also, use the same number of strokes on each tooth on the chain, with a good amount being three to six.
Remember one thing, always try to maintain manufacturer’s recommendations while sharpening your chainsaw chain. It helps to keep it balanced.
There must be a question on your mind, how often to sharpen chainsaw blade, right? So, it really depends on your use and the conditions of the blade you are using.
In this case, keep the sharpening of blades of your saw on your regular chainsaw maintenance. To sharpen the blades of your chainsaw you can use different modern tools for chainsaw maintenance as well.
4.Make Sure Your Chainsaw is Lubricated
You should always keep in mind one thing that; your chainsaw needs to be oiled perfectly. It helps to reduce being overheated and the frictions between the chain and the guide bar as well.
If your chainsaw is not lubricated, then I can guarantee you, it won’t work as fast as supposed to do. And for sure, it could get overheated.
To check there’s enough oil or not, I’ll give an easy way here. Put a piece of paper or cardboard over it, you will find the sprinkle of oil onto the surface. And if you are unable to find it, that means there isn’t enough oil in your chainsaw or need to add more oil in it. It should be oiled without any kind of dirt or debris that could dislodge or jam the chain.
To lubricated your chainsaw, my suggestion will be to follow the manufacturing process. The reason is the process is varying from one to another depending on the chainsaw model and company.
5.Use New Gas
Use fresh and new gasoline in your chainsaw for best chainsaw maintenance. If you are not using your chainsaw on a regular basis, there must have a chance of tumbling the gas from it. If you stored your chainsaw for a few days, the gas in it breaking down. And for those reasons, it will not work rightly.
So, you need to put enough gas in it to last 30 days at least. Or else, you can use a fuel additive to retain the gas as new and fresh months.
As the chainsaw is an expensive tool for you. So, you need to pay attention to the maintenance of chainsaw. You can store your chainsaw for months or years with proper maintenance. In fact, your other power tools and equipment as well. Always store your chainsaw out of reach of children. For example, a suitable place to store your tools is in a cupboard or in a lockable room.
The chainsaw is a great tool that easy to Care for and Maintain. Of late, chainsaws are rapidly used by woodworkers, DIYers, arborists and so many. They all need to have proper maintenance of chainsaw. As the powerful and largest won’t able to cut with a dull chainsaw chain. So, Sharpen the Chainsaw Chain in just a few minutes! By now, I hope you should have got an idea of it.
Congratulation! You completed the journey with the content Tips to Care for and Maintain a Chainsaw like a pro.