Miter saws are undoubtedly a crucial tool for woodworkers especially. Not only is it super-efficient to use a power miter saw, but it is even easier to handle than other saws. But conditions applied! Just because you asked a friend how to use a miter saw and he said it’s a piece of cake, does not make it easy. It would be easy for you only if you have experience in handling saws for a long time. Or perhaps you should just understand and learn how to use a power miter saw properly.
If you are new to using a miter saw you may have many questions regarding how to use it. In this blog, we are here to assist you to handle your blade maintaining the miter saw safety rules. We would discuss how you should use a power miter saw properly to get almost 100% work done perfectly from it.
How to Use A Power Miter Saw
- Clean Cuts Start With a Steady Handling and a Firm Grip. So, Line Up the Blade at One Side of the Mark
Although using a miter saw is easier than a jigsaw, being able to get fine cuts at your first go is pretty tough. In order to align your cut, raise the blade guard using your thumb and one edge of the blade should sight downwards. And during aligning the cuttings, do not forget to move your finger away from the switch for safety reasons. Now, either clamp the work-piece to the table or tightly hold it against the table. Then, to do the cuttings, gradually release the blade guard and take your hand back to the switch.
Whether you need to do trimmings for windows or doors or even crowns, a miter saw is by far the most useful tool. For almost all kinds of tight-fitting joint cuts for molding, a power miter saw is ideal. Just by some slight angling, a power miter saw with a sharp blade is the best tool for fine-tuning a joint!
If you are a beginner, as soon as you push the start button, you will eventually feel the jerking and force increasing with the increase in its speed. Always wait till the blade reaches its peak speed before starting your cuts. And if you have a miter saw which guarantees a smooth start, you can start cutting right then and there. Then at a slow and steady pace, lower the blade and finish the cutting. Then keep the blade lowered in the same position and wait till the blade to completely stop rotating. Now, lift the blade once the blade has stopped. Do not let the work piece loose till the blade has completely stopped rotating.
You cannot get perfect aligning just in your first attempt. However, with regular practice, it would become really easy for anyone. Always keep a few things in mind.
- Keep the work piece tightly clamped
- Cut a little extra length
- Adjust the miter angle whenever necessary
2 . Adjust the Angle for Perfect Miter Cuts
The best way to get clear and precise cuts are keeping the miter in a correct setting. Always change the miter angle to a well-fitted setting. Keep the blade angle adjuster under your thumb and fit in the handle tightly. Many of our readers complain that the miters do not fit properly and think there is some problem with their saw.
However, it is pretty rare to get the miters fitted right at your first go. And it takes adjusting the angles even if by a quarter of an angle sometimes. And like many others if your miters touch at back and a gap remain in the front, it can be fixed in two ways. For a compound miter saw, do not change the angle settings. Rather, tilt the blade at 1 or 2 degrees and re cut the miter at the back to fix the problem. And in case your saw does not tilt, use a carpenter’s pencil and lift the work piece and then cut. With regular practicing it would be easier to cut through the wood more finely.
3. Create a Jig to Hold Crowns and Coves
In order to hold the crown moldings at their right place, building a jig could be extremely efficient. You need to keep the crown upside down and mark the end point in the jig. Tightly screw the stop at your jig and remove all the fasteners away from the blade.
Many trim pieces need to be fitted at an angle with ceilings or walls. To cut crowns, bed, and cove moldings, suppose the saw bed is the ceiling or the wall. Position the work piece at the same angle it would fit the wall or the ceiling. And it is crucial to keep the molding at a constant angle in which using a jig is a great way. Just place it accordingly and cut like you normally would. You would come up with flawless cuts.
4. Cutting Short Pieces Requires Special Techniques
Like any other sharp saw, miter saws are also potentially dangerous. Cutting short pieces of wood is particularly dangerous to use a power miter saw. If you are willing to mold work pieces smaller than 8 inches, it is better to start cutting it from
a longer piece of wood. This would show the safety spot of the saw. For work pieces less than 6 inches, start cutting from both ends first. Start from one miter side and mark it. Then change the miter angle and start cutting from the other end. Always remember, changing the miter angles accordingly is the main key to getting best cuts.
Even, sometimes the small pieces might fall through the fence holes. So, it is better to start cutting from a longer work piece. As every model of miter saw come with a different set of features, it is better to practice more with it.
5. Required Tools for A Project
Rather than using a well-set miter saw, if you wish to DIY, you need to keep a few materials in place. Having all the tools in place would make your job easier and save you a lot of time. Some of the required tools are,
- Hearing protection
- Safety goggles
- Power miter saw
6. Required Materials for A Project
Apart from some of the tools, you need a few other materials for any sawing. Especially if you are a beginner, a list of materials for using a miter saw would be extremely useful to you. You need to have the following materials for your project.
- Stop blocks
- ¾ inch sized screws
Woodworkers swear by a great quality power miter saw. Whether it is crown molding or angled cuts, if you use a power miter saw properly, you would surely get the best results. However, beginners may find it utterly difficult to get accurate cuts with a miter saw. But if you get a proper briefing and practice diligently, you could easily master the use of this saw. That is why in this blog, we bought you the most effective ways to use a miter saw. By now, you probably have a good idea of how to start working with it!
Read More Blogs